Bases de datos bibliográficas:

Publicaciones del académico:

• Characterization of Polylactic Acid Biocomposites Filled with Native Starch Granules from <i>Dioscorea remotiflora</i> Tubers
• Polypropylene Composites Reinforced with Lignocellulose Nanocrystals of Corncob: Thermal and Mechanical Properties
• Characterization of Polylactic Acid Biocomposites Filled with Native Starch Granules from Dioscorea remotiflora Tubers
• Properties of polylactic acid blends with potato thermoplastic starch using maleated polyethylene as a compatibilizer

• Effect of Surface Modification on the Properties of Buckwheat Husk—High-Density Polyethylene Biocomposites
• Recycled Polymer Blends and Composites
• Mechanical recycling of PLA: Effect of weathering, extrusion cycles, and chain extender
• Polymer Processing Technology to Recycle Polymer Blends
• Blown film stability for low, medium, and high molecular weight polylactic acid and their tensile properties
• Estrategias y mejoras en el reciclaje de compuestos elastoméricos

• Influence of pretreated sugarcane bagasse fiber by steam explosion, soaking with caustic soda, and addition of coupling agent into polylactic acid biocomposites
• Ground tire rubber/polyamide 6 thermoplastic elastomers produced by dry blending and compression molding

• Ground tire rubber/polyamide 6 thermoplastic elastomers produced by dry blending and compression molding
• Effects of Nopal Mucilage (Opuntia ficus-indica) as Plasticizer in the Fabrication of Laminated and Tubular Films of Extruded Acetylated Starches
• Rotational molding of compatibilized PA6/LLDPE blends
• Generation of photopolymerized microparticles based on PEGDA using microfluidic devices. part 1. initial gelation time and mechanical properties of the material
• Rotational molding of poly (lactic acid)/polyethylene blends: Effects of the mixing strategy on the physical and mechanical properties
• Fiber-matrix interface improvement via glycidyl methacrylate compatibilization for rotomolded poly (lactic acid)/agave fiber biocomposites
• Fiber-matrix interface improvement via glycidyl methacrylate compatibilization for rotomolded poly(lactic acid)/agave fiber biocomposites
• Rotational Molding of Poly(Lactic Acid)/Polyethylene Blends: Effects of the Mixing Strategy on the Physical and Mechanical Properties
• Effect of rubber surface treatment on the properties of rotomolded thermoplastic elastomers

• Analysis of bubble formation during injection molding of polymeric foams by computational fluid dynamics simulations
• Mechanical and thermal properties of polyethylene/carbon nanofiber composites produced by rotational molding
• Morphological and mechanical properties of bilayers wood-plastic composites and foams obtained by rotational molding

• Preparación y caracterización de materiales reforzados de polietileno y fibras de carbono por termocompresión
• The multirole of modified natural gums for multicomponent polymers: as coupling agents for polymers reinforced with cellulosic fibers or compatibilizers for biodegradable …
• Increasing the efficiency of organic solar cells by using a bulk electron transport layer of PFN and green synthesized AgNs
• Effect of low nanoclay content on the physico-mechanical properties of poly (lactic acid) nanocomposites
• Moldeo rotacional de mezclas de poli (ácido láctico)/polietileno compatibilizadas
• Effect of low nanoclay content on the physico-mechanical properties of poly(lactic acid) nanocomposites
• The multirole of modified natural gums for multicomponent polymers: As coupling agents for polymers reinforced with cellulosic fibers or compatibilizers for biodegradable polymer blends

• Long-term closed-loop recycling of high-density polyethylene/flax composites
• Polylactic acid–agave fiber biocomposites produced by rotational molding: A comparative study with compression molding
• Thermal analysis of foamed polyethylene rotational molding followed by internal air temperature profiles
• Después del tequila: aprovechamiento de la fibra de Agave tequilana para la producción de composites y biomateriales
• Mechanical characterization of polyethylene/carbon nanofiber composites prepared by rotational molding
• Optimization of the rotational molding processing of Agave fiber / LMDPE composite materials.
• Morphology and mechanical properties of poly(lactic acid)/polyethylene blends produced by rotational molding

• Improvement of Pb (II) Adsorption Capacity by Controlled Alkali Treatment to Chitosan Supported onto Agave Fiber‐HDPE Composites
• Native and modified gelatin films produced by casting, extrusion, and blowing extrusion processes
• High density polyethylene degradation followed by closed-loop recycling
• Effect of fiber content and surface treatment on the mechanical properties of natural fiber composites produced by rotomolding
• Rotational molding of polylactic acid and agave fiber biocomposites
• Preparation of PA6/LLDPE blends by rotational molding
• Effect of agave fiber surface treatment on the properties of polyethylene composites produced by dry‐blending and compression molding
• Effect of agave fiber surface treatment on the properties of polyethylene composites produced by dry-blending and compression molding
• High density polyethylene degradation followed by closedloop recycling
• Improvement of Pb(II) Adsorption Capacity by Controlled Alkali Treatment to Chitosan Supported onto Agave Fiber-HDPE Composites
• Thermoplastic Composites: Emerging Technology, Uses and Prospects
• Handbook of Composites from Renewable Materials